DIY Christmas Shelf Wreath

My staircase shelf was seriously lacking some holiday spirit. I didn't want to buy anything new (I dread going to the shops during the holiday season), and per my usual style I wanted to create something myself. When I realized I had so much leftover material from my Craft Beer-Inspired Christmas Wreath I decided to make another wreath, but with a twist.

You will need the following materials:

The majority of the items on the left were leftover pieces I've had for years now. I newly purchased the 4 items on the right from Hobby Lobby - Bauble stems: $0.77 each | Wreath $2.50 | Bronze pine cones: $0.50 | Evergreen stem: $1.00

These were the leftover materials I used from my Craft Beer-Inspired Christmas Wreath (shown new). 2 Evergreen stems on left: $3.99 each - Michael's | Evergreen stem on right: $2.50 - Hobby Lobby | Glittery hop stems: $0.75 each - Michael's

Taking wire cutters, place as shown:

Add your glittery & colorful pieces. Secure everything using a hot glue gun.

Add accent pieces...

 ...and you are done!

No shelf space? No problem - this can be used as wall decor too!

DIY Mini-Pumpkin Patch

Going into this Fall season, I knew I wanted to incorporate hay stacks into my seasonal decor, specifically these cute miniature size ones I found at Michael's! Since hay is synonymous with pumpkin patches, I found it fitting to 'stage' a DIY mini-pumpkin patch for my staircase shelf in my living room! This was styled more towards the neutral spectrum of color with pops of autumnal color (you know how much I love my neutrals!!), but there are so many ways you can customize this to make it your own -you can add more color, or other objects synonymous with the Fall season.  

You will need the following materials: Grand Total: 10.52!!

Metal bucket - I painted mine white (Michael's - $2.99 Full Price; $1.79 with coupon)

Hay Stacks (Michael's - $4.49 Full Price; $2.25 with coupon)

Mini-Pumpkin & Pine Cones (Hobby Lobby - $6.99 Full Price; $4.19 with discount)

Mini-Wood Crate (Michael's - $1.00 Full Price; $0.50 with coupon)

Harvest Corn (Hobby Lobby - $2.99 Full Price; $1.79 with discount)

Paint Sponge

3 paint colors of your choice I used these:

What you want to do first is turn your bucket on its side and arrange your setup to cascade out of the bucket. Stage your pumpkin patch before you paint any of the pieces. This allows you to plan out what colors you want to paint each pumpkin. Since I'm using 3 different paint colors - I made sure I didn't put the same colors near each other to ensure that the overall look would not fall flat & bland to the eye. Use 2 coats and let dry. Shown below was my initial set-up:

I felt like it was missing that little something extra, specifically color & dimension! To fix this, I added a crate to give the setup depth and height. I also added the corn for a pop of color and fullness. Simply painted the crate white and twisted off the corn from each stem.
Add acorns & pine cones, place on your shelf, & you are done!!!

Easy DIY Floating Mantel UNDER $20!!

When my husband and I moved into our home, we loved everything about it...except for the very awkwardly situated/peculiar looking "crawl space". For 2 years I've looked at it everyday and have struggled to design a way to decorate it. I didn't want to block it with entryway storage shelving because we live in a tornado-prone area, and we found that a fireplace console would run a tad short. Then one day I was thinking about our old apartment and how much I missed having a mantel - decorating it and the liveliness it brought into the living room. Inspiration hit and here we are :)

Before

You will need the following materials:

Power Saw or Hand Saw
Power Drill
Hammer
Protective eyewear
Stud Finder
Level
2 Clamps
Paint or Wood Finish of your choice
Sandpaper
Measuring tape

As far as nails & drill bits - those are personal preference, but I will show an image of the ones I used in the tutorial :)

Boring but necessary technical stuff:

Interior Support Bracket - 3 - 1"x6"x6ft Common Board @ $5.42 each - (Link Here) 
Top, Bottom, Side, & Front Shelving - 1 - 2"x3"x96" Whitewood Board @ $2.17 - (Link Here)
GRAND TOTAL: $18.43!!

Mantel Dimensions (approximate-after sanding down & smoothing edges):
57.5 inches long
4 1/16 inches tall
6 5/16 inches wide

Using your power saw, cut all 4 wood boards to your desired length. I cut mine to 56 inches.

Using the wood leftover from the Whitewood, cut four - 3 3/4 inch pieces. These will serve as the interior frame.

Now to connect the 4 interior frame pieces to the support bracket >> Use a 3/32" drill bit to drill pilot holes into your support bracket.

Then use a 7/16" wood bore in the same spots. DO NOT SKIP THIS STEP! Doing this will ensure that the bracket will lay flush up against the wall when mounted.

You should have 4 sections that look something like this (shadows emphasized):

Secure a frame over each section with a 3" 7.62 cm screw in combination with wood glue & a clamp.

Your finished support bracket should then look like this.

Now for the front the shelf >> Trim your Whitewood boards  to be 6 inches wide. We trimmed just a teensy bit more than 6 inches in order to account for what we would lose when sanding.

Sand till smooth to the touch. Then choose a paint or wood finish. I choose this paint since it was used for all the baseboards in my home  Plus, leftover paint = no need to spend any $$$ ;)

Remember - you only need to paint what will be exposed.

Mount your support bracket to the wall with the following nails. Don't forget to use your level!

Connect your front, top, and bottom shelf piece to the bracket with FINISHING NAILS - this is necessary so that the nail heads aren't visible.

I highly suggest using wood glue not only for added strength but also to fill in any gaps. Clamp as shown & let dry overnight.

Add the front & side pieces. Sand where necessary so that all edges are smooth and become flush with one another.

If you still find that, despite sanding, there are uneven places where the different pieces of wood meet each other, use wood filler glue. As you can see in the images below, using wood filler glue in combination with sanding makes a drastic difference!

Without sanding or wood filler glue

With sanding & wood filler glue - Left End

With sanding & wood filler glue - Right End

Add a 2nd and/or 3rd coat of paint, decorate as you wish, and you are done!

Before

After

 I designed & created the rustic-weathered picket fence & window accent pieces --> tutorial on these and how I (inexpensively) styled my mantel coming very soon!!